TSC - Adhesive film

This is the red and white TSC adhesive film for outdoor lettering.

Permanently adhesive film for car and other outdoor or indoor applications on smooth surfaces. The film is supplied in one piece and is also in adhesive condition as shown.

How to apply:

Thoroughly clean the surface to be adhered to (window cleaner, detergent, or other cleaning agents are not recommended). Application temperature min. 5° Celsius. Dry the surface with a cloth or by waiting. Remove a small part of the backing paper (approx. 2 – 3 cm) at the outer edge (recommended on the right for right-handed people), so that the adhesive film can be fixed and positioned unilaterally at the edge. When positioning, the film should be slightly lifted at the already removed part of the backing paper and only make contact with the surface in its final position. By fixing it at the edge, the film now adheres on one side, and you can lift the entire sticker on the non-adhering side to remove the rest of the backing paper. By rubbing evenly with a cloth or squeegee – from the middle upwards and downwards – the adhesive film is now attached to the surface from the already adhering side towards the held-up side. The pressure should be medium. After the film is fully fixed, the transparent transfer film can be removed. The adhesive requires approx. 3 – 4 days, depending on the weather, to become permanently firm. During this time, cleaning in a car wash or with a pressure washer should be avoided. The film can only be used once.